DIN CERTCO quality mark · EN ISO 17225-2 · DACH markets

DINplus and DIN+ — the German quality mark for wood pellets

Everything about DINplus certification: how it differs from ENplus and the basic DIN+ certificate, which parameters the laboratory controls, how initial and control testing works, who should get certified, and how much it costs and takes.

DINplus is a German quality mark for wood pellets, awarded by the certification body DIN CERTCO (a company in the TÜV Rheinland group) on the basis of a certification programme founded on the EN ISO 17225-2 standard; product requirements are close to ENplus class A1, and the mark itself enjoys particularly strong recognition in the German, Austrian and Swiss markets. Unlike the basic DIN+ certificate, which confirms only the product's conformity with the standard, DINplus combines product testing with an assessment of factory production control, periodic control testing and surveillance of mark usage — it is therefore proof not only of the parameters of a single sample, but of the repeatability of quality over time.

Key takeaways

  • DIN+ = basic certificate (conformity with the standard); DINplus = full quality mark with production control, control testing and mark surveillance.
  • DINplus quality parameters are close to ENplus A1: ash ≤ 0.7%, NCV ≥ 16.5 MJ/kg, durability ≥ 97.5%, fines ≤ 1.0%.
  • Certification is run by DIN CERTCO; testing is performed by neutral, accredited laboratories, and surveillance includes periodic control testing of the product.
  • The mark is particularly important for exports to Germany, Austria and Switzerland (DACH) — many buyers list it explicitly in purchasing specifications.
  • The indicative certification time is 2–4 months with functioning quality control; a consultant prepares the plant, DIN CERTCO takes the decision.

How DINplus differs from ENplus and DIN+

Two large, independent quality systems operate side by side in the pellet market: the European ENplus, managed by the European Pellet Council, and the German DINplus, run by DIN CERTCO. Both base their product requirements on the same standard — EN ISO 17225-2 — so at the level of laboratory parameters they are close cousins. The differences lie in the system architecture and in the market where the mark works most strongly.

DINplus vs ENplus

ENplus is a chain system: it certifies producers, traders and service providers (bagging, storage, transport), and batch traceability runs from the sawmill to the customer. DINplus is a classic product quality mark in the German model: at its centre stands product testing by a neutral laboratory and factory production control at the plant, with surveillance based on periodic control tests commissioned by the body. In export practice, ENplus A1 and DINplus are sometimes treated as equivalent proof of quality, but there are buyers — especially in the traditional German fuel trade — whose specification says literally "DINplus" and who honour only that document.

DINplus vs DIN+

This is the distinction most often confused by people new to the subject. DIN+ (written with a plus after the letters DIN) is the basic certificate: it confirms the product's conformity with the referenced standard — currently EN ISO 17225-2 — on the basis of testing, but without extended system requirements and without full mark surveillance. DINplus (plus written as one word) is a higher-order quality mark: it requires initial testing, implemented factory production control, conformity with the DIN CERTCO certification programme and acceptance of periodic control testing. In commercial communication it is worth minding the spelling — "we have DIN" or "we have DIN+" is not the same as DINplus, and a German buyer knows the difference.

Historically, DINplus was one of the first pellet quality marks in Europe and for years set the standard in the German market before ENplus gained the position of a global system. This heritage still works: for some buyers in the DACH region the DINplus mark is synonymous with "pellets from controlled production", regardless of what other labels say.

A nutshell comparison of system architectures

Setting the two systems side by side, the practical differences for a plant come down to a few points. Scope of entities: ENplus certifies the whole chain (production, trading, services); DINplus focuses on the product and its manufacturer. Source of control: in ENplus the plant audit is carried out by a certification body auditor — a person with a checklist in your hall; in DINplus, the result of testing in a neutral laboratory is central, and the assessment of factory production control plays a complementary role. Surveillance: ENplus relies on an annual surveillance audit and batch traceability; DINplus on periodic control tests commissioned by the body. The mark: both are protected trademarks, but the numbering, graphic rules and enforcement methods are separate. For an exporting producer the consequence is simple: these are not substitute documents but complementary market tools — and neither of them exempts you from maintaining parameters day to day.

It is also worth naming a frequent misunderstanding explicitly: a mere reference to the standard — "our pellets meet EN ISO 17225-2, class A1" — is not a certificate. A declaration of conformity with the standard is the producer's statement on its own responsibility; DIN+ and DINplus are independent confirmations of that conformity by a third party, and DINplus adds surveillance over time. In commercial correspondence with DACH buyers this distinction has real negotiating value.

Quality requirements for pellets

The DIN CERTCO certification programme for wood pellets refers to the requirements of EN ISO 17225-2 for premium-class fuel (the level corresponding to A1). The feedstock must be chemically untreated wood — sawdust, shavings, wood chips — free of varnishes, impregnating agents and joinery waste containing glues or coatings. Permitted additives (e.g. pressing aids) require declaration and acceptance under the programme.

ParameterDINplus requirementReference
Diameter6 ± 1 mm or 8 ± 1 mmISO 17829
Length3.15 < L ≤ 40 mmISO 17829
Moisture (as received)≤ 10%ISO 18134
Ash (dry basis)≤ 0.7%ISO 18122
Net calorific value NCV≥ 16.5 MJ/kg (≥ 4.6 kWh/kg)ISO 18125
Mechanical durability≥ 97.5%ISO 17831-1
Fines < 3.15 mm≤ 1.0%ISO 18846
Bulk density600–750 kg/m³ISO 17828
Ash deformation temperature≥ 1200 °CISO 21404
Feedstockchemically untreated wood; additives to be declaredEN ISO 17225-1

Summary values according to EN ISO 17225-2 and the DIN CERTCO certification programme; the binding documents are always the current certification programme and the standard to which it refers.

Comparing this table with the ENplus classes reveals the source of the frequent simplification "DINplus = A1". It is useful for marketing, but two differences are worth remembering: first, ENplus A1 tightened mechanical durability to 98.0% (DINplus remains at the standard level of 97.5%), and second, ENplus splits the fines limit into 1.0% in bulk and 0.5% in bags. A plant producing stably at ENplus A1 level generally meets the DINplus requirements without technological changes — the difference is documentation and a second testing cycle.

Feedstock and additives — programme boundaries

The certification programme closes the feedstock question precisely: virgin wood and wood-industry by-products that have not been chemically treated are permitted — no varnishes, stains, impregnating agents, glues from furniture boards or coatings. This excludes from the mark-certified stream most "urban" joinery waste and demolition waste. Refining additives (e.g. starch or other pressing aids) are not banned but require declaration and acceptance under the programme, and their use must be consistent with what the plant declares in the application. In practice, I recommend a simple preliminary test before applying for the mark: a cross-section of feedstock suppliers, quality documents from each of them, and a series of ash tests on feedstock samples. If a single supplier systematically spoils the average — it is the supplier, not the technology, that is the first candidate for correction.

System requirements of the DIN CERTCO programme

The heart of the programme is factory production control (FPC) — a documented set of checks that the plant performs with its own resources on every batch or at a fixed shift rhythm: moisture of feedstock and pellets, mechanical durability, bulk density, fines, length. Results must be recorded and linked to batches so that every despatched unit can be traced back to the shift, feedstock and control results.

The programme additionally requires: a sampling procedure and retention-sample storage, handling of nonconforming product (quarantine, downgrading, recall), supervision of measuring equipment (calibration of scales, moisture meters, the durability tester), evaluation and control of feedstock suppliers, and staff training. In practice, FPC documentation for DINplus and the quality system for ENplus overlap by 80–90% — which is why many plants maintain a single documentation set with mapped requirements of both systems.

An important feature of the DIN CERTCO model: the emphasis lies on product testing by neutral laboratories. Factory production control must be real and auditable, but it is the results of initial and control testing that form the hard pillar of the mark decision. A plant that "produces well but does not document" has a problem at the audit; a plant that "documents well but the batch does not hold parameters" fails at testing — both paths must be closed.

Testing laboratory — analysis of wood pellet parameters for DINplus certification

Documentation that must exist before the application

A practical checklist before submitting the application to DIN CERTCO covers at least: a factory production control instruction with a table of parameters, frequencies and responsibilities; shift-control record forms; an instruction for taking and storing retention samples; a procedure for handling nonconforming product together with its register; a list of measuring equipment with calibration statuses; feedstock specifications and a list of evaluated suppliers; and the labelling designs intended for notification. The documents do not have to be voluminous — they have to be applied. Five pages of a procedure that an operator uses every day wins in the assessment over thirty pages nobody on the shop floor has seen.

Who DINplus is for

DINplus makes sense above all for pellet producers exporting to Germany, Austria and Switzerland. If your sales model is contracts with German bulk distributors, DIY retail chains or fuel wholesalers in the DACH region, many buyers treat the DINplus mark as the basic quality document — alongside, and sometimes instead of, ENplus A1. This applies especially to channels where the buyer is the traditional fuel trade, attached to German quality marks for years.

Who else might consider DINplus? Producers selling in Poland to premium customers who want to stand out from competitors with a mark recognisable as "made by German certification". On the other hand, DINplus has no dedicated service scopes for trading and logistics companies like ENplus — if your business is pellet trading and transport, the right tool is rather the trading/service providers scope in ENplus or sustainability schemes (SURE, KZR INiG) where the buyer is the energy sector.

The decision is worth taking hard-headedly, on the contract list: write down your buyers and check which mark appears in their purchasing specifications and calculations. If ENplus A1 dominates — start with ENplus. If DINplus appears as a requirement or strong preference — its cost will pay back in access to contracts you will not sign without the mark. Many plants exporting to DACH ultimately maintain both marks, because they segment different sales channels.

Three producer profiles for which DINplus is usually the right choice are: plants with a significant share of bulk sales through German distributors (where the mark works at the level of commercial relationships, not just documentation); producers offering own brands in German retail chains, where the mark on the bag is a shelf-level argument; and plants planning long-term framework contracts in which the purchasing specification explicitly names the required quality document. Conversely — if you sell mainly to the Polish market or through traders who attach their own chain certificates themselves, ENplus will be the first step with a better cost-to-effect ratio.

The DIN CERTCO certification process and testing

The process differs from the ENplus path in that it is more "laboratory-based" than "audit-based". A typical course:

  1. Application to DIN CERTCO — registering the product (wood pellets, indicating the manufacturing plant, diameters, scope), together with product documentation and a declaration of feedstocks and additives.
  2. Initial testing (starting sample) — taking a representative sample and full testing in a neutral, accredited laboratory indicated by DIN CERTCO: all parameters from the requirements table, including elements and ash deformation temperature.
  3. Assessment of factory production control — verification that the plant operates documented FPC: shift checks, batch records, supervision of measuring equipment, handling of nonconformities.
  4. Granting the right to the mark — after positive results DIN CERTCO issues the certificate and registers the mark for the specific product and plant; the entity enters the public database of mark holders.
  5. Control testing (surveillance) — in the mark maintenance cycle DIN CERTCO commissions further product tests; an out-of-limit result triggers explanatory proceedings, and in the case of repeated nonconformities — suspension or withdrawal of the right to the mark.

The practical difference versus ENplus: in ENplus the certification body's auditor spends a day at the plant sniffing through records, silos and the screener; in DINplus the laboratory result plays first fiddle. That is why preparation for DINplus starts with a series of in-house "trial" tests — before the formal starting sample goes to the certifying laboratory, it is worth knowing the result and closing problems cheaply, outside the official process.

Formally, the decision to grant and maintain the mark rests exclusively with DIN CERTCO. The consultant's role comes down to preparation: FPC documentation, control of measuring equipment, preliminary in-house testing and guiding the plant through the response to any nonconforming results.

Initial testing versus control testing

The system separates the starting test from surveillance over time, and the logic of both is worth understanding. Initial testing answers the question: can this product, from this plant, with this feedstock base, achieve the full set of parameters — including those the plant does not normally measure itself, such as ash deformation temperature or element content. Its failure stops the process on the spot, before any mark-related charges arise. Control tests answer a different question: is quality repeatable after months of production, feedstock changes and normal die wear. That is why the worst strategy is "preparing one ideal batch for certification" — control testing will verify the real state anyway, and a nonconforming result in surveillance costs far more nerves (and reputation with the body) than postponing the application by a quarter of process-stabilising work.

A practical rule I apply in preparations: a plant is ready to apply only when, for at least 4–6 weeks, internal measurements of all batches fall within the limits with a safety margin (ash below 0.6%, durability above 98.0%, fines at despatch below 0.8%), and the retention samples from that period are complete and labelled. This is not a formal requirement — it is a buffer for laboratory uncertainty and normal process fluctuation.

Labelling and mark surveillance

The DINplus mark is a protected trademark. The right to use it belongs exclusively to the holder of a valid registration and only for the product and manufacturing plant it concerns — pellets from a second plant of the same company are not automatically covered by the mark. Packaging designs (bags, big-bag labels) and documents bearing the mark must be agreed with DIN CERTCO before implementation; mandatory elements include the mark itself with the registration number, product data (diameter, size class), certificate-holder details and batch identification.

For bulk deliveries, the delivery document performs the function of a label: quality class, mark registration number, batch identification and quantity must be linked to the specific transport. DIN CERTCO surveillance covers not only product testing but also market monitoring — use of the mark after the registration has expired, on a product outside the scope, or in a graphic form inconsistent with the rules are grounds for withdrawing the right to the mark and, if necessary, legal steps. This should be taken seriously: the German market is small and well connected informationally, and a complaint alleging mark misuse goes straight to the mark owner.

On an organisational side note: mark surveillance also means the obligation to keep your data with the body up to date. A change of company name, relocation of production, a significant change of the feedstock recipe or launching a new packaging design without notification are situations that can cost more time to straighten out than all the rest of system maintenance combined. The simplest approach is to treat the mark registration like an insurance policy: it has a scope, it has conditions, and it requires reporting changes — it is worth reading the certification agreement in exactly that order before signing.

Typical problems in DINplus certification

The problems of plants certifying to DINplus recur with a regularity that allows them to be eliminated before the application is filed. Three areas dominate:

  • Feedstock — a seasonal change of the feedstock base (more bark in autumn, forest chips instead of sawmill sawdust) pushes ash above 0.7% or lowers the ash deformation temperature below 1200 °C; the plant learns about it from control testing instead of its own feedstock testing programme. Solution: supplier specifications, ash testing per supplier/feedstock batch and a reserve of "safe" feedstock.
  • Mechanical durability — results on the 97.5% borderline mean the process runs without margin: a change of die, milling moisture or mix recipe moves the result below the limit. Before initial testing, the process should be stabilised so that internal measurements repeatedly give 98.0%+ — with a reserve for measurement uncertainty and feedstock fluctuation.
  • Fines — pellets leaving the press with 0.4% fines have 1.5% after three conveyors, the cooler and loading. Testing takes the sample from the point of despatch, so what counts is the state at the end of the chain. A review of transfer points (drops, sharp elbows, conveyor speeds) helps, and — for bulk sales — a screening station before loading.

Alongside this trio, the following regularly return: an uncalibrated durability tester (internal results "beautiful", laboratory results — not), retention samples stored with no link to the batch number, and labelling implemented by the sales department without agreeing the design with DIN CERTCO. None of these points requires technological investment — they require system discipline, which is cheapest to build before initial testing, not after it.

A fourth, less obvious problem is mixing streams for different markets. A plant producing pellets under DINplus and pellets outside the mark at the same time must be able to show at any moment which silo, which heap and which batch belong to the certification scope. If the boundary is "conventional" — one hall, one warehouse, no markings — then in the event of control testing with a nonconforming result more product will fall under the mark than the plant wanted, and no explanation about "a batch from another line" will help without records. Physical separation or iron-clad traceability: one of the two must exist.

And finally the fifth: treating initial testing as a one-off test. Pelleting processes drift — dies wear out, feedstock mixes change seasonally, dryers work differently in winter and summer. The DIN CERTCO surveillance system is built precisely to catch this drift; a plant that does not measure the drift with its own instruments learns about it from the letter suspending the mark. An internal chart of results over time (even a simple spreadsheet) is more effective here than the most beautifully written procedure.

Costs and timeline — indicative figures

The cost structure of DINplus is simpler than ENplus, because there are no chain fees or national licences — you pay the certification body and the laboratory. Indicative orders of magnitude for one plant and one product:

  • DIN CERTCO fees — application processing, granting and maintenance of the right to the mark (registration and annual fees): in total in the order of several to a dozen or so thousand PLN in the first year, less in subsequent years.
  • Laboratory testing — initial testing of the full parameter set is usually PLN 3–6 thousand; control tests in the surveillance cycle generate an analogous cost annually.
  • Plant preparation — FPC documentation, calibrations, any in-house testing before the starting sample: from a few to a dozen or so thousand PLN, depending on the system's maturity.
  • Technical investments — from zero (when the plant already maintains parameters) to the cost of a screening station or modernisation of transfer points, if fines need correction.

As for the schedule: with functioning quality control and stable parameters, the path from application to the mark is indicatively 2–4 months — waiting for laboratory slots and document circulation dominates. If factory production control has yet to be built or mechanical durability stabilised, realistically add 1–2 months of your own work before the formal start. Plants certified in parallel to ENplus often synchronise the testing of both systems in a single time window, which limits cost and downtime.

Frequently asked questions about DINplus

DIN+ is the basic certificate confirming the pellet's conformity with the standard (currently EN ISO 17225-2), without extended system requirements. DINplus is a full quality mark: in addition to product conformity it requires implemented factory production control, initial testing and periodic control testing commissioned by DIN CERTCO, as well as surveillance of mark usage. Compared with ENplus A1 the difference is mainly institutional and market-related: DINplus quality parameters are close to class A1, but the scheme is run by the German DIN CERTCO, and the mark holds a particularly strong position in the German, Austrian and Swiss markets.

There is no legal obligation to hold DINplus or any other quality mark. The German market is, however, strongly certificate-oriented: wholesale buyers, DIY chains and bulk distributors expect the DINplus mark or ENplus A1 as proof of repeatable quality. For a producer from Poland wishing to build permanent sales channels in Germany, Austria or Switzerland, DINplus is in practice a condition of entry into part of the contracts — especially where the buyer is the traditional fuel trade.

The certificate is issued by DIN CERTCO — a certification company from the TÜV Rheinland group. The process includes submitting an application, initial product testing in a neutral, accredited laboratory, and an assessment of factory production control at the plant. After the right to the mark is granted, surveillance applies: DIN CERTCO commissions periodic control tests of the product, and results outside the limits may lead to suspension or withdrawal of the right to label. A consultant prepares the plant for certification, but the decision on granting and maintaining the mark rests exclusively with DIN CERTCO.

This is a purely market-driven decision. The quality parameters of both schemes at A1 level are very similar, so the cost is mainly a second cycle of testing and fees, not a production rebuild. If a significant share of your sales goes to Germany, Austria or Switzerland through buyers who explicitly list DINplus in their specifications, the second mark genuinely opens contracts. If your sales channels accept ENplus A1, double certification most often does not pay for itself in the price. Many plants combine both schemes into one testing and control programme, which limits maintenance costs.

The initial test covers the full set of parameters from EN ISO 17225-2 for wood pellets: diameter and length, moisture, ash, net calorific value, mechanical durability, fines, bulk density, ash deformation temperature, and the content of elements (nitrogen, sulphur, chlorine) and any additives. After the mark is granted, DIN CERTCO commissions control tests in the surveillance cycle — the product is sampled and tested again in a neutral laboratory to confirm that quality is maintained over time, not only in the starting sample.

Indicatively, in the first year you should plan for: DIN CERTCO fees for application processing and the right to the mark, the cost of laboratory testing (initial and control), and the cost of preparing factory production control. In total for one plant this is usually in the range of several thousand to tens of thousands of PLN, depending on the number of products and the laboratory. The time from application to granting the mark is indicatively 2–4 months if the plant already has functioning quality control; longer if it has to be built from scratch or the technology changed.

No. The DINplus mark is a protected trademark and may be used only within the limits of the granted registration — for a specific product, manufacturing plant and scope. Packaging and label designs bearing the mark must be agreed with DIN CERTCO before implementation; this applies to bags, big-bags and documents accompanying bulk deliveries. Using the mark after the certificate has expired or been withdrawn, or in relation to a product outside the registration, constitutes an infringement and grounds for action by the mark owner.
Wood pellet quality control — sampling for DINplus testing

DINplus in numbers

  • Ash ≤ 0.7%; NCV ≥ 16.5 MJ/kg
  • Mechanical durability ≥ 97.5%
  • Fines ≤ 1.0% (< 3.15 mm)
  • Certifying body: DIN CERTCO (TÜV Rheinland group)
  • Surveillance: periodic control testing of the product

Exporting pellets to Germany, Austria or Switzerland?

We will prepare your plant for DINplus certification: factory production control documentation, trial initial testing and guidance through the process with DIN CERTCO.

Ask about DINplus preparation